PRODUCT DESCRIPTION: ATLANTIS COOL-CUT is MULTI-PURPOSE SOLUBLE CUTTING OIL manufactured from carefully selected paraffinic base oils and proprietary emulsifiers which have a bearing on the stability of the emulsion even with water of 400 ppm hardness. A stable milky white emulsion is prepared by adding the oil to water with continuous stirring. ATLANTIS COOL-CUT gives the desired cooling characteristics, provides rust protection, lubricity for the cutting operation with good finish of work piece and longer life for tools. ATLANTIS COOL-CUT is also fortified with appropriate biocides to keep control of bacterial growth.
APPLICATION: ATLANTIS COOL-CUT is recommended for variety of cutting operations in both ferrous and non-ferrous metals. For general machining operations the emulsion is normally prepared with 5% oil and for grinding operation the emulsion has 2% of oil.
CAUTION: Not recommended for Machining for Magnesium as fine chips of magnesium is a fire hazard when moistened with water.
PERFORMANCE LEVEL: Meets IS 1115-1986 (RA 2002)
Inquire us for more info
| CHARACTERISTICS | ATLANTIS COOL-CUT | ||||||||
| Water, % mass, Max | 10.0 | ||||||||
| Copper strips corrosion at 1000C for 3 Hrs, Max. | 1 (a) | ||||||||
| Emulsion Stability Test, 5:1 and 20:1 ratio in water of 400 ppm hardness | Passes | ||||||||
| Thermal stability Test | Passes | ||||||||
| Ash, % by mass, Max. | 3.5 | ||||||||
| Frothing Test, 5:1 and 20:1 ration in water of 200 ppm | Passes | ||||||||
| Flash Point, COC, 0C, Min. | 150 | ||||||||
| Cast Iron corrosion test | 0/1-1 | ||||||||
| Available Packing: 5 Ltr, 10 Ltr, 20 Ltr, 26 Ltr, 50 Ltr & 210 Ltr | |||||||||
