Atlantis Coolcut M114 is formulated from leading edge base oils, additives and proprietary emulsifiers which have a bearing on the stability of the emulsion even with water of 400 ppm hardness. A stable milky white emulsion is prepared by adding the oil to water with continuous stirring. Atlantis Coolcut M114 gives the desired cooling characteristics, provides rust protection and lubricity for the cutting operation with good finish of work piece and longer life for tools. Atlantis Coolcut M114 is also fortified with appropriate biocides to keep control of bacterial growth.
Atlantis Coolcut M114 is recommended for a variety of cutting operations in both ferrous and non-ferrous metals. The recommended concentration is between 2 to 10% depending on the severity of machining. Atlantis Coolcut M114 meets IS 1115-1986 (RA 2002).
Caution: Not recommended for machining of magnesium, as fine chips of magnesium are a fire hazard when moistened with water.
| Test Parameter | Method | Unit | Result |
|---|---|---|---|
| Appearance | Visual | - | Clear & Bright |
| Colour | Visual | - | Brown |
| Emulsion Test, 5:1 & 20:1 in 400 ppm water, 24 Hrs | IS 1448 P 98 | - | Passes |
| Frothing Test, 5:1 & 20:1 in 200 ppm water | IS 1448 P 99 | ml | 20 ml froth, collapses in 10 sec |
| Water Content, % Weight | IS 1448 P 40 | % | 1.82 |
| Thermal Stability | IS 1448 P 100 | - | Passes |
| Ash % | IS 1448 P 40 | % | 0.9 |
| Copper Strip Corrosion, 100°C 3 Hrs | IS 1448 P 15 | - | 1a |
| Volatile Matter at 100°C 16 Hrs, % by mass | IS 1115-1986 | % | 1.1 |
| Cast Iron Corrosion Test, 20:1 in 400 ppm water | IS 1115-1986 (App A) | - | 0/1-1 |
| Flash Point | IS 1448 P 69 | °C | 207 |
Please refer to your vehicle manufacturer's manual for the recommended grade of lubricant best suited to your vehicle.
Talk to our team for pricing, availability and the right specification for your fleet.